user_mobilelogo
          DST CONTROL PRODUCT FOLDER     

Gyro stabilised micro gimbal
This email address is being protected from spambots. You need JavaScript enabled to view it.

Features

The OTUS-U135 gyro stabilised micro gimbal provides outstanding performance in one of the smallest form factors available.

The two axis gimbal reach a new level of stabilisation performance thanks to purpose-built high-bandwidth torque motors implementing active vibration attenuation. All electronics required for the advanced digital control fits within the unit shell. The user only have to connect an external power supply, a video monitor and a joystick, to have the system up and running.

A three dimensional micro-mechanical IMU and a laser range finder mounted directly on the optical bench, allows for advanced features like geo-location and geo-positioning, provided an external heading source is connected to the OTUS-U135.

The powerful digital servo controller of the OTUS-U135 is even capable of providing enough computational power to drive optional features like vehicle control and navigation.

Images

Technical specifications

Gimbal System Two axis gyro stabilised fully integrated direct drive gimbal with embedded laser range finder
Stabilisation Better than 250 urad (100 urad option)
Range Finder Performance Up to 1500 m range (option)
Pan/Tilt Range and Slew Rate Infinite range if payload do not require extending snout (sliprings in both axes), 120°/sec maximum slew rate
Interfaces 1 x RS485 for user interaction, 1 x composite video and/or 1 x component video
Feedback Performance 0.036°/±0.1° typical encoder resolution/accuracy, 200 Hz update rate
Power requirements 18 to 36 Vdc, 15 W (typical)
Temperature 0 to +50°C operational, -40 to +50°C (option), -20 to +85°C storage
Weight 1.5 kg (depending on payload)
Dimensions 135 mm diamater x 185.4 mm height
Standard payload SONY block camera of type FCB-EH6300 (Full HD), or according to customer specification (maximum size 50 x 50 x 100 mm)

Downloads

OTUS-U135 datasheet [English]
OTUS-U135 datasheet [Russian]

Ordering

OTUS-U135 High-Def GUA0746S61 NOTE: 1,2,3
     
OPTIONS:    
Laser range finder 50 m -LR50 NOTE: 4
Laser range finder >1.5 km -LR1K NOTE: 5
Automatic video tracking -VT  
Geo-location -GL  
Geo-tracking -GT NOTE: 6
Low temperature handling -LT NOTE: 7
NTSC video interface -NT  
High-stabilisation better then 100 urad -HI  
     
ACCESSORIES:    
Check out the OTUS Accessories pages for Hand Control Units, Video Recorders, etc.    
 
NOTES
1: Standard protection level: IP40
2: Standard surface coating colour: Satin Gray
3: Main payload: SONY FCB-EH6300 with analog HD interface (component: Y/Pb/Pr)
4: LRF: Laser Range Finder, 50 (200) m range, 3 mm accuracy
5: LRF: Laser Range Finder >1500 range, 1 m accuracy
6: Geo-tracking: Requires Geo-location option
7: Low temperature: -40 to +50°C operational

Gyro stabilised micro gimbal
This email address is being protected from spambots. You need JavaScript enabled to view it.

Features

The OTUS-U135 gyro stabilised micro gimbal provides outstanding performance in one of the smallest form factors available.

The two axis gimbal reach a new level of stabilisation performance thanks to purpose-built high-bandwidth torque motors implementing active vibration attenuation. All electronics required for the advanced digital control fits within the unit shell. The user only have to connect an external power supply, a video monitor and a joystick, to have the system up and running.

A three dimensional micro-mechanical IMU and a laser range finder mounted directly on the optical bench, allows for advanced features like geo-location and geo-positioning, provided an external heading source is connected to the OTUS-U135.

The powerful digital servo controller of the OTUS-U135 is even capable of providing enough computational power to drive optional features like vehicle control and navigation.

Images

Technical specifications

Gimbal System Two axis gyro stabilised fully integrated direct drive gimbal with embedded laser range finder
Stabilisation Better than 100 urad
Range Finder Performance Up to 1500 m range (option)
Pan/Tilt Range and Slew Rate Infinite range if payload do not require extending snout (sliprings in both axes), 120°/sec maximum slew rate
Interfaces 1 x RS485 for user interaction, 1 x composite video and/or 1 x component video
Feedback Performance 0.036°/±0.1° typical encoder resolution/accuracy, 200 Hz update rate
Power requirements 18 to 36 Vdc, 15 W (typical)
Temperature 0 to +50°C operational, -40 to +50°C (option), -20 to +85°C storage
Weight from 1.5 kg (depending on payload)
Dimensions 135 mm diamater x 185.4 mm height
Standard payload SONY block camera of type FCB-EH6300 (Full HD), or according to customer specification (maximum size 50 x 50 x 100 mm)

Downloads

OTUS-U135 datasheet [English]
OTUS-U135 datasheet [Russian]

Ordering

OTUS-U135 High-Def Spotter GUA0746S65 NOTE: 1,2,3
     
OPTIONS:    
Laser range finder 50 m -LR50 NOTE: 4
Laser range finder >1.5 km -LR1K NOTE: 5
Automatic video tracking -VT  
Geo-location -GL  
Geo-tracking -GT NOTE: 6
Low temperature handling -LT NOTE: 7
NTSC video interface -NT  
     
ACCESSORIES:    
Check out the OTUS Accessories pages for Hand Control Units, Video Recorders, etc.    
 
NOTES
1: Standard protection level: IP40
2: Standard surface coating colour: Satin Gray
3: Main payload: SONY FCB-EH6300 with analog HD interface (component: Y/Pb/Pr)
4: LRF: Laser Range Finder, 50 (200) m range, 3 mm accuracy
5: LRF: Laser Range Finder >1500 range, 1 m accuracy
6: Geo-tracking: Requires Geo-location option
7: Low temperature: -40 to +50°C operational

Gyro stabilised micro gimbal
This email address is being protected from spambots. You need JavaScript enabled to view it.

Features

The OTUS-U135 gyro stabilised micro gimbal provides outstanding performance in one of the smallest form factors available.

The two axis gimbal reach a new level of stabilisation performance thanks to purpose-built high-bandwidth torque motors implementing active vibration attenuation. All electronics required for the advanced digital control fits within the unit shell. The user only have to connect an external power supply, a video monitor and a joystick, to have the system up and running.

A three dimensional micro-mechanical IMU and a laser range finder mounted directly on the optical bench, allows for advanced features like geo-location and geo-positioning, provided an external heading source is connected to the OTUS-U135.

The powerful digital servo controller of the OTUS-U135 is even capable of providing enough computational power to drive optional features like vehicle control and navigation.

Images

Technical specifications

Gimbal System Two axis gyro stabilised fully integrated direct drive gimbal with embedded laser range finder
Stabilisation Better than 250 urad (100 urad option)
Range Finder Performance Up to 1500 m range (option)
Pan/Tilt Range and Slew Rate Infinite range if payload do not require extending snout (sliprings in both axes), 120°/sec maximum slew rate
Interfaces 1 x RS485 for user interaction, 1 x composite video and/or 1 x component video
Feedback Performance 0.036°/±0.1° typical encoder resolution/accuracy, 200 Hz update rate
Power requirements 18 to 36 Vdc, 15 W (typical)
Temperature 0 to +50°C operational, -40 to +50°C (option), -20 to +85°C storage
Weight from 1.4 kg (depending on payload)
Dimensions 135 mm diamater x 185.4 mm height
Standard payload SAITIS-640 or FLIR TAU-640 or RAVEN-640, 18° HFOV (25 , 32 or 45° option), PAL (NTSC option), or according to customer specification (maximum size 50 x 50 x 100 mm)

Downloads

OTUS-U135 datasheet [English]
OTUS-U135 datasheet [Russian]

Ordering

OTUS-U135 -IR:T640-35 Detector GUA0746S11 NOTE: 1,2,3
OTUS-U135 -IR:S640-35 Detector GUA0746S12 NOTE: 1,2,4
OTUS-U135 -IR:R640-35 Detector GUA0746S13 NOTE: 1,2,5
     
OPTIONS:    
Laser range finder 50 m -LR50 NOTE: 6
Laser range finder >1.5 km -LR1K NOTE: 7
Automatic video tracking -VT  
Geo-location -GL  
Geo-tracking -GT NOTE: 8
Low temperature handling -LT NOTE: 9
NTSC video interface -NT  
High-stabilisation better then 100 urad -HI  
Upgrade to full rate -FR NOTE: 10
Alternative IR-lens SAITIS-640S -IR:S640-(lensnumber) NOTE: 11
Alternative IR-lens FLIR TAU-640 -IR:T640-(lensnumber) NOTE: 12
Alternative IR-lens RAVEN-640 -IR:R640-(lensnumber) NOTE: 13
     
ACCESSORIES:    
Check out the OTUS Accessories pages for Hand Control Units, Video Recorders, etc.    
 
NOTES
1: Standard protection level: IP40
2: Standard surface coating colour: Satin Gray
3: Main payload: FLIR Tau 640, 35mm lens, HFOV 18°, 9Hz, composite PAL
4: Main payload: SAITIS-640, 35mm lens, HFOV 18°, 25Hz, composite PAL
5: Xenics Raven-640-Analog, 35mm lens, HFOV 18°, 25Hz, composite PAL
6: LRF: Laser Range Finder, 50 (200) m range, 3 mm accuracy
7: LRF: Laser Range Finder >1500 range, 1 m accuracy
8: Geo-tracking: Requires Geo-location option
9: Low temperature: -40 to +50°C operational
10: Upgrade to full rate for FLIR TAU camera for OTUS-U135 (25 Hz PAL/30 Hz NTSC)
11: SAITIS-640S with an alternative lens of your choice 13 , 19 or 25 mm (HFOV 45 , 32 or 25°) More information about SAITIS
12: FLIR TAU-640 with an alternative lens of your choice 13 , 19 or 25 mm (HFOV 45 , 32 or 25°)
13: RAVEN-640 with an alternative lens of your choice 13 , 19 or 25 mm (HFOV 45 , 32 or 25°)

Gyro stabilised micro gimbal
This email address is being protected from spambots. You need JavaScript enabled to view it.

Features

The OTUS-U135 gyro stabilised micro gimbal provides outstanding performance in one of the smallest form factors available.

The two axis gimbal reach a new level of stabilisation performance thanks to purpose-built high-bandwidth torque motors implementing active vibration attenuation. All electronics required for the advanced digital control fits within the unit shell. The user only have to connect an external power supply, a video monitor and a joystick, to have the system up and running.

A three dimensional micro-mechanical IMU and a laser range finder mounted directly on the optical bench, allows for advanced features like geo-location and geo-positioning, provided an external heading source is connected to the OTUS-U135.

The powerful digital servo controller of the OTUS-U135 is even capable of providing enough computational power to drive optional features like vehicle control and navigation.

Images

Technical specifications

Gimbal System Two axis gyro stabilised fully integrated direct drive gimbal with embedded laser range finder
Stabilisation Better than 250 urad (100 urad option)
Range Finder Performance Up to 1500 m range (option)
Pan/Tilt Range and Slew Rate Infinite range if payload do not require extending snout (sliprings in both axes), 120°/sec maximum slew rate
Interfaces 1 x RS485 for user interaction, 1 x composite video and/or 1 x component video
Feedback Performance 0.036°/±0.1° typical encoder resolution/accuracy, 200 Hz update rate
Power requirements 18 to 36 Vdc, 15 W (typical)
Temperature 0 to +50°C operational, -40 to +50°C (option), -20 to +85°C storage
Weight from 1.4 kg (depending on payload)
Dimensions 135 mm diamater x 185.4 mm height
Standard payload FLIR TAU-320 microbolometer, 13° HFOV (18°, 24°, 34° or 48° option), PAL (NTSC option), or according to customer specification (maximum size 50 x 50 x 100 mm)

Downloads

OTUS-U135 datasheet [English]
OTUS-U135 datasheet [Russian]

Ordering

OTUS-U135 Detector 320 GUA0746S11 NOTE: 1,2,3
     
OPTIONS:    
Laser range finder 50 m -LR50 NOTE: 4
Laser range finder >1.5 km -LR1K NOTE: 5
Automatic video tracking -VT  
Geo-location -GL  
Geo-tracking -GT NOTE: 6
Low temperature handling -LT NOTE: 7
NTSC video interface -NT  
High-stabilisation better then 100 urad -HI  
Upgrade to full rate -FR NOTE: 8
Alternative IR-lens -IR:T320-(lensnumber) NOTE: 9
     
ACCESSORIES:    
Check out the OTUS Accessories pages for Hand Control Units, Video Recorders, etc.    
 
NOTES
1: Standard protection level: IP40
2: Standard surface coating colour: Satin Gray
3: Main payload: FLIR Tau 320 microbolometer, 13° HFOV, 9 Hz frame rate, PAL interface
4: LRF: Laser Range Finder, 50 (200) m range, 3 mm accuracy
5: LRF: Laser Range Finder >1500 range, 1 m accuracy
6: Geo-tracking: Requires Geo-location option
7: Low temperature: -40 to +50°C operational
8: Upgrade to full rate for FLIR TAU camera for OTUS-U135 (25 Hz PAL/30 Hz NTSC)
9: FLIR TAU-320 with an alternative lens of your choice 13 , 19 , 25 , 35 mm (HFOV 48 , 34 , 24 or 18°)

Gyro stabilised micro gimbal
This email address is being protected from spambots. You need JavaScript enabled to view it.

Features

The OTUS-U135 gyro stabilised micro gimbal provides outstanding performance in one of the smallest form factors available.

The two axis gimbal reach a new level of stabilisation performance thanks to purpose-built high-bandwidth torque motors implementing active vibration attenuation. All electronics required for the advanced digital control fits within the unit shell. The user only have to connect an external power supply, a video monitor and a joystick, to have the system up and running.

A three dimensional micro-mechanical IMU and a laser range finder mounted directly on the optical bench, allows for advanced features like geo-location and geo-positioning, provided an external heading source is connected to the OTUS-U135.

The powerful digital servo controller of the OTUS-U135 is even capable of providing enough computational power to drive optional features like vehicle control and navigation.

Images

Technical specifications

Gimbal System Two axis gyro stabilised fully integrated direct drive gimbal with embedded laser range finder
Stabilisation Better than 100 urad
Range Finder Performance Up to 1500 m range (option)
Pan/Tilt Range and Slew Rate Infinite range if payload do not require extending snout (sliprings in both axes), 120°/sec maximum slew rate
Interfaces 1 x RS485 for user interaction, 1 x composite video and/or 1 x component video
Feedback Performance 0.036°/±0.1° typical encoder resolution/accuracy, 200 Hz update rate
Power requirements 18 to 36 Vdc, 15 W (typical)
Temperature 0 to +50°C operational, -40 to +50°C (option), -20 to +85°C storage
Weight 1.5 kg (depending on payload)
Dimensions 135 mm diamater x 185.4 mm height
Standard payload SONY block camera of type FCB-EX1020P, PAL (NTSC option), or according to customer specification (maximum size 50 x 50 x 100 mm)

Downloads

OTUS-U135 datasheet [English]
OTUS-U135 datasheet [Russian]

Ordering

OTUS-U135 Spotter GUA0746S01 NOTE: 1,2,3
     
OPTIONS:    
Laser range finder 50 m -LR50 NOTE: 4
Laser range finder >1.5 km -LR1K NOTE: 5
Automatic video tracking -VT  
Geo-location -GL  
Geo-tracking -GT NOTE: 6
Low temperature handling -LT NOTE: 7
NTSC video interface -NT  
     
ACCESSORIES:    
Check out the OTUS Accessories pages for Hand Control Units, Video Recorders, etc.    
 
NOTES
1: Standard protection level: IP40
2: Standard surface coating colour: Satin Gray
3: Main payload: SONY FCB-EX1020P with PAL interface
4: LRF: Laser Range Finder, 50 (200) m range, 3 mm accuracy
5: LRF: Laser Range Finder >1500 range, 1 m accuracy
6: Geo-tracking: Requires Geo-location option
7: Low temperature: -40 to +50°C operational
  1. OTUS-U135 SURVEYOR
  2. OTUS-U135 SURVEYOR DUO
  3. OTUS-U135 HIGH-DEF DUO