user_mobilelogo
          DST CONTROL PRODUCT FOLDER     

Gyro stabilised micro gimbal
This email address is being protected from spambots. You need JavaScript enabled to view it.

Features

The OTUS-U135 gyro stabilised micro gimbal provides outstanding performance in one of the smallest form factors available.

The two axis gimbal reach a new level of stabilisation performance thanks to purpose-built high-bandwidth torque motors implementing active vibration attenuation. All electronics required for the advanced digital control fits within the unit shell. The user only have to connect an external power supply, a video monitor and a joystick, to have the system up and running.

A three dimensional micro-mechanical IMU and a laser range finder mounted directly on the optical bench, allows for advanced features like geo-location and geo-positioning, provided an external heading source is connected to the OTUS-U135.

The powerful digital servo controller of the OTUS-U135 is even capable of providing enough computational power to drive optional features like vehicle control and navigation.

Images

Technical specifications

Gimbal System Two axis gyro stabilised fully integrated direct drive gimbal with embedded laser range finder
Stabilisation Better than 250 urad (100 urad option)
Range Finder Performance Up to 1500 m range (option)
Pan/Tilt Range and Slew Rate Infinite range if payload do not require extending snout (sliprings in both axes), 120°/sec maximum slew rate
Interfaces 1 x RS485 for user interaction, 1 x composite video and/or 1 x component video
Feedback Performance 0.036°/±0.1° typical encoder resolution/accuracy, 200 Hz update rate
Power requirements 18 to 36 Vdc, 15 W (typical)
Temperature 0 to +50°C operational, -40 to +50°C (option), -20 to +85°C storage
Weight from 1.4 kg (depending on payload)
Dimensions 135 mm diamater x 185.4 mm height
Standard payload SONY block camera of type FCB-EX20DP, PAL (NTSC option), or according to customer specification (maximum size 50 x 50 x 100 mm)

Downloads

OTUS-U135 datasheet [English]
OTUS-U135 datasheet [Russian]

Ordering

OTUS-U135 Surveyor GUA0746S31 NOTE: 1,2,3
     
OPTIONS:    
Laser range finder 50 m -LR50 NOTE: 4
Laser range finder >1.5 km -LR1K NOTE: 5
Automatic video tracking -VT  
Geo-location -GL  
Geo-tracking -GT NOTE: 6
Low temperature handling -LT NOTE: 7
NTSC video interface -NT  
High-stabilisation better then 100 urad -HI  
     
ACCESSORIES:    
Check out the OTUS Accessories pages for Hand Control Units, Video Recorders, etc.    
 
NOTES
1: Standard protection level: IP40
2: Standard surface coating colour: Satin Gray
3: Main payload: SONY FCB-EX20DP with PAL interface
4: LRF: Laser Range Finder, 50 (200) m range, 3 mm accuracy
5: LRF: Laser Range Finder >1500 range, 1 m accuracy
6: Geo-tracking: Requires Geo-location option
7: Low temperature: -40 to +50°C operational

Gyro stabilised micro gimbal
This email address is being protected from spambots. You need JavaScript enabled to view it.

Features

The OTUS-U135 gyro stabilised micro gimbal provides outstanding performance in one of the smallest form factors available.

The two axis gimbal reach a new level of stabilisation performance thanks to purpose-built high-bandwidth torque motors implementing active vibration attenuation. All electronics required for the advanced digital control fits within the unit shell. The user only have to connect an external power supply, a video monitor and a joystick, to have the system up and running.

A three dimensional micro-mechanical IMU and a laser range finder mounted directly on the optical bench, allows for advanced features like geo-location and geo-positioning, provided an external heading source is connected to the OTUS-U135.

The powerful digital servo controller of the OTUS-U135 is even capable of providing enough computational power to drive optional features like vehicle control and navigation..

Images

Technical specifications

Gimbal System Two axis gyro stabilised fully integrated direct drive gimbal with embedded laser range finder
Stabilisation Better than 250 urad (100 urad option)
Range Finder Performance Up to 1500 m range (option)
Pan/Tilt Range and Slew Rate Infinite range if payload do not require extending snout (sliprings in both axes), 120°/sec maximum slew rate
Interfaces 1 x RS485 for user interaction, 1 x composite video and/or 1 x component video
Feedback Performance 0.036°/±0.1° typical encoder resolution/accuracy, 200 Hz update rate
Power requirements 18 to 36 Vdc, 15 W (typical)
Temperature 0 to +50°C operational, -40 to +50°C (option), -20 to +85°C storage
Weight from 1.5 kg (depending on payload)
Dimensions 135 mm diamater x 185.4 mm height
Standard payload SONY block camera of type FCB-H11 and SAITIS-640S 25mm lens (13 or 19 mm options), PAL (NTSC option), or according to customer specification (maximum size 50 x 50 x 100 mm)

Downloads

OTUS-U135 datasheet [English]
OTUS-U135 datasheet [Russian]

Ordering

OTUS-U135 High-Def Duo GUA0746S63 NOTE: 1,2,3
     
OPTIONS:    
Laser range finder 50 m -LR50 NOTE: 4
Laser range finder >1.5 km -LR1K NOTE: 5
Automatic video tracking -VT  
Geo-location -GL  
Geo-tracking -GT NOTE: 6
Increased protection level option [-IP44]  
Low temperature handling -LT NOTE: 7
NTSC video interface -NT  
High-stabilisation better then 100 urad -HI  
Alternative IR-lens for SAITIS-640S -IR:S640-(lensnumber) NOTE: 8
Alternative IR-camera -IR:T640-(lensnumber) NOTE: 9
     
ACCESSORIES:    
Check out the OTUS Accessories pages for Hand Control Units, Video Recorders, etc.    
 
NOTES
1: Standard protection level: IP40
2: Standard surface coating colour: Satin Gray
3: Main payload: SONY FCB-H11 with PAL interface and SAITIS-640S with 25mm lens
4: LRF: Laser Range Finder, 50 (200) m range, 3 mm accuracy
5: LRF: Laser Range Finder >1500 range, 1 m accuracy
6: Geo-tracking: Requires Geo-location option
7: Low temperature: -40 to +50°C operational
8: SAITIS-640S with alternative lens of your choice: 13 or 19 mm More information about SAITIS
9: FLIR TAU-640 with the lens of your choice (13 , 19 or 25 mm)

Gyro stabilised micro gimbal
This email address is being protected from spambots. You need JavaScript enabled to view it.

Features

The OTUS-L170 gyro stabilised micro gimbal provides outstanding performance in one of the smallest form factors available.

The two axis gimbal reach a new level of stabilisation performance thanks to purpose-built high-bandwidth torque motors implementing active vibration attenuation. All electronics required for the advanced digital control fits within the unit shell. The user only have to connect an external power supply, a video monitor and a joystick, to have the system up and running.

A three dimensional micro-mechanical IMU and a laser range finder mounted directly on the optical bench, allows for advanced features like geo-location and geo-positioning, provided an external heading source is connected to the OTUS-L170.

The powerful digital servo controller of the OTUS-L170 is even capable of providing enough computational power to drive optional features like vehicle control and navigation.

Images

Technical specifications

Gimbal System Two axis gyro stabilised fully integrated direct drive gimbal with embedded laser range finder
Stabilisation Better than 100 urad
Range Finder Performance Up to 1500 m range (option)
Pan/Tilt Range and Slew Rate Infinite range if payload do not require extending snout (sliprings in both axes), 120°/sec maximum slew rate
Interfaces 1 x RS485 for user interaction, 1 x composite video and/or 1 x component video
Feedback Performance 0.036°/±0.1° typical encoder resolution/accuracy, 200 Hz update rate
Power requirements 18 to 36 Vdc, 15 W (typical)
Temperature 0 to +50°C operational, -40 to +50°C (option), -20 to +85°C storage
Weight 2.4 kg
Dimensions 170 mm diamater x 243 mm height
Standard payload SONY block camera of type FCB-EX1020P and FLIR Tau-320 9 Hz (25/30 Hz option), 13° HFOV, PAL (NTSC option), or according to customer specification

Downloads

OTUS-L170 datasheet [English]
OTUS-L170 datasheet [Russian]

Ordering

OTUS-L170 Spotter GUA1018T01 NOTE: 1,2,3,4
     
OPTIONS:    
Laser range finder 50 m -LR50 NOTE: 5
Laser range finder >1.5 km -LR1K NOTE: 6
Automatic video tracking -VT  
Geo-location -GL  
Geo-tracking -GT NOTE: 7
Increased protection level option [-IP44]  
Low temperature handling -LT NOTE: 8
NTSC video interface -NT  
Upgrade to full rate FLIR TAU camera for OTUS-L170 (25 Hz PAL/30 Hz NTSC) -FR  
     
ACCESSORIES:    
Check out the OTUS Accessories pages for Hand Control Units, Video Recorders, etc.    
 
NOTES
1: Standard protection level: IP40
2: Standard surface coating colour: Satin Gray
3: Main payload: SONY FCB-EX1020P with PAL interface
4: Main payload: FLIR Tau 320 microbolometer, 13° HFOV, 9 Hz update rate, PAL interface
5: LRF: Laser Range Finder, 50 (200) m range, 3 mm accuracy
6: LRF: Laser Range Finder >1500 range, 1 m accuracy
7: Geo-tracking: Requires Geo-location option
8: Low temperature: -40 to +50°C operational
9: FLIR TAU-320 with alternative lens of your choice 9 , 13 , 19 or 25 mm (HFOV 48, 34 , 24 or 18°)

Gyro stabilised micro gimbal
This email address is being protected from spambots. You need JavaScript enabled to view it.

Features

The OTUS-L170 gyro stabilised micro gimbal provides outstanding performance in one of the smallest form factors available.

The two axis gimbal reach a new level of stabilisation performance thanks to purpose-built high-bandwidth torque motors implementing active vibration attenuation. All electronics required for the advanced digital control fits within the unit shell. The user only have to connect an external power supply, a video monitor and a joystick, to have the system up and running.

A three dimensional micro-mechanical IMU and a laser range finder mounted directly on the optical bench, allows for advanced features like geo-location and geo-positioning, provided an external heading source is connected to the OTUS-L170.

The powerful digital servo controller of the OTUS-L170 is even capable of providing enough computational power to drive optional features like vehicle control and navigation.

Images

Technical specifications

Gimbal System Two axis gyro stabilised fully integrated direct drive gimbal with embedded laser range finder
Stabilisation Better than 250 urad
Range Finder Performance Up to 1500 m range (option)
Pan/Tilt Range and Slew Rate Infinite range if payload do not require extending snout (sliprings in both axes), 120°/sec maximum slew rate
Interfaces 1 x RS485 for user interaction, 1 x composite video and/or 1 x component video
Feedback Performance 0.036°/±0.1° typical encoder resolution/accuracy, 200 Hz update rate
Power requirements 18 to 36 Vdc, 15 W (typical)
Temperature 0 to +50°C operational, -40 to +50°C (option), -20 to +85°C storage
Weight 2.3 kg
Dimensions 170 mm diamater x 243 mm height
Standard payload SONY block camera of type FCB-EX20DP and FLIR Tau-320, 13° HFOV, PAL (NTSC option), or according to customer specification

Downloads

OTUS-L170 datasheet [English]
OTUS-L170 datasheet [Russian]

Ordering

OTUS-L170 Surveyor GUA1018T31 NOTE: 1,2,3,4
     
OPTIONS:    
Laser range finder 50 m -LR50 NOTE: 5
Laser range finder >1.5 km -LR1K NOTE: 6
Automatic video tracking -VT  
Geo-location -GL  
Geo-tracking -GT NOTE: 7
Increased protection level option [-IP44]  
Low temperature handling -LT NOTE: 8
NTSC video interface -NT  
     
ACCESSORIES:    
Check out the OTUS Accessories pages for Hand Control Units, Video Recorders, etc.    
 
NOTES
1: Standard protection level: IP40
2: Standard surface coating colour: Satin Gray
3: Main payload: SONY FCB-EX20DP with PAL interface
4: Main payload: FLIR Tau 320 microbolometer, 13° HFOV, 9 Hz update rate, PAL interface
5: LRF: Laser Range Finder, 50 (200) m range, 3 mm accuracy
6: LRF: Laser Range Finder >1500 range, 1 m accuracy
7: Geo-tracking: Requires Geo-location option
8: Low temperature: -40 to +50°C operational

Gyro stabilised micro gimbal
This email address is being protected from spambots. You need JavaScript enabled to view it.

Features

The OTUS-L170 gyro stabilised micro gimbal provides outstanding performance in one of the smallest form factors available.

The two axis gimbal reach a new level of stabilisation performance thanks to purpose-built high-bandwidth torque motors implementing active vibration attenuation. All electronics required for the advanced digital control fits within the unit shell. The user only have to connect an external power supply, a video monitor and a joystick, to have the system up and running.

A three dimensional micro-mechanical IMU and a laser range finder mounted directly on the optical bench, allows for advanced features like geo-location and geo-positioning, provided an external heading source is connected to the OTUS-L170.

The powerful digital servo controller of the OTUS-L170 is even capable of providing enough computational power to drive optional features like vehicle control and navigation.

Images

Technical specifications

Gimbal System Two axis gyro stabilised fully integrated direct drive gimbal with embedded laser range finder
Stabilisation Better than 100 urad
Range Finder Performance Up to 1500 m range (option)
Pan/Tilt Range and Slew Rate Infinite range if payload do not require extending snout (sliprings in both axes), 120°/sec maximum slew rate
Interfaces 1 x RS485 for user interaction, 1 x composite video and/or 1 x component video
Feedback Performance 0.036°/±0.1° typical encoder resolution/accuracy, 200 Hz update rate
Power requirements 18 to 36 Vdc, 15 W (typical)
Temperature 0 to +50°C operational, -40 to +50°C (option), -20 to +85°C storage
Weight 2.4 kg
Dimensions 170 mm diamater x 243 mm height
Standard payload SONY block camera of type FCB-EX1020P and FLIR Tau-640 9 Hz (25/30 Hz option), 18° HFOV, PAL (NTSC option), or according to customer specification

Downloads

OTUS-L170 datasheet [English]
OTUS-L170 datasheet [Russian]

Ordering

OTUS-L170 Spotter 640 GUA1018T23 NOTE: 1,2,3,4
     
OPTIONS:    
Laser range finder 50 m -LR50 NOTE: 5
Laser range finder >1.5 km -LR1K NOTE: 6
Automatic video tracking -VT  
Geo-location -GL  
Geo-tracking -GT NOTE: 7
Increased protection level option [-IP44]  
Low temperature handling -LT NOTE: 8
NTSC video interface -NT  
Upgrade to full rate FLIR TAU camera for OTUS-L170 (25 Hz PAL/30 Hz NTSC) -FR  
     
ACCESSORIES:    
Check out the OTUS Accessories pages for Hand Control Units, Video Recorders, etc.    
 
NOTES
1: Standard protection level: IP40
2: Standard surface coating colour: Satin Gray
3: Main payload: SONY FCB-EX1020P with PAL interface
4: Main payload: FLIR Tau 640 microbolometer, 18° HFOV, 9 Hz update rate with PAL interface
5: LRF: Laser Range Finder, 50 (200) m range, 3 mm accuracy
6: LRF: Laser Range Finder >1500 range, 1 m accuracy
7: Geo-tracking: Requires Geo-location option
8: Low temperature: -40 to +50°C operational
  1. OTUS-L170 SEARCHER
  2. OTUS-L170 HIGH-DEF SPOTTER
  3. OTUS-L170 HIGH-DEF
  4. OTUS-L170 DETECTOR DUO 320

Subcategories

Stabilised Sensor Systems